- Free shipping for orders over 250$ in the United States
End of Time:
:::
0
0 items
$0.00
No products in the cart.
- Competition Cams a trusted industry leader
- Backed by manufacturer's warranty
- Designed for good performance
Add to Wishlist
Add to Wishlist
- CRAZY STRONG BILLET ALUMINUM TIE ROD SLEEVES. Proforged tie rod adjusting sleeves are machined from a solid bar of billet aluminum for ultimate strength. Every fit surface of these 6061-T6 aluminum sleeves are CNC machined for precision fit and finish - the threads are matched to our tie rod ends, and we recommend using them together for optimal results. These work with most other brands of tie rods, but there are occasional issues when other brands use a different thread tolerance or specification.
- 1,000,000 MILE WARRANTY. You can install our tie rod sleeves with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
- BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged.
- WHAT IS A TIE ROD SLEEVE? A tie rod adjusting sleeve is part of your vehicle’s steering system - it ties together your inner and outer tie rod ends to allow your wheels to turn.
Add to Wishlist
Add to Wishlist
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Add to Wishlist
Add to Wishlist
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Add to Wishlist
Add to Wishlist
Brand | Daystar |
Auto Part Position | Rear |
Material | Polyurethane |
- Reduces body roll and shift
- Reduces stress on steering components
- Improves handling characteristics
- Vehicle fluid and road grime resistant
- 4 bushing/2 sleeves
Add to Wishlist
Add to Wishlist
- Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Add to Wishlist
Add to Wishlist
Brand | ACDelco |
Auto Part Position | Front |
Style | Modern |
Exterior Finish | Machined |
- Helps absorb and dampen road input into your vehicle’s suspension
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
Add to Wishlist
Add to Wishlist
- Designed, engineered, tested, and warranted for GM vehicles
- Precise fit for ease of installation
- For proper installation, locate your nearest GM dealer, independent service center, or body shop
Add to Wishlist
Add to Wishlist
Brand | Addco |
Auto Part Position | Front |
Style | Modern |
Vehicle Service Type | Car |
Exterior Finish | Black |
- Replaces OE bar
- ADDCO High Grade Steel with Durable Black Powder Coated Finish to resist corrosion.
- Exact fit, high performance, durable urethane bushings for precision feel.
- Bar Diameter: 1.250" (1 1/4 ") Position: Front & Fits Years: 1963-82
- ADDCO Forever Warranty
Add to Wishlist
Add to Wishlist
- Uses stock mounting points
- ADDCO High Grade Steel with Durable Black Powder Coated Finish to resist corrosion.
- Exact fit, high performance, durable urethane bushings for precision feel.
- Bar Diameter: 1.125" (1 1/8 ") Position: Front & Fits Years: 1965-69
- ADDCO Forever Warranty
Add to Wishlist
Add to Wishlist
Vintage Air Control Panel
$307.05- Control Panel
Add to Wishlist
Add to Wishlist
- 1982-92 GM F-Body
- Black
Add to Wishlist
Add to Wishlist
- No component has as drastic effect on your body roll as the Anti-Sway bars without adversely affecting your ride quality
- To the average enthusiast, the installation of a ST anti-sway bar will result in a drastic reduction in the boat-like feel that many vehicles have with the factory or even mildly tuned suspension
- By increasing the rate of the front, rear or both bars over the factory units, your body roll will be reduced giving you more confidence on long sweeping corners, on and off ramps, as well as in emergency maneuvers
- Each ST anti-sway bar is designed and produced in-house at the California facility and are constructed from high quality steel for precision performance, and powder coated for durability
- All necessary high grade mounting hardware and bushings, as well as full instructions are included in each and every kit for simple installation
Add to Wishlist
Add to Wishlist
- Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
- We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
- Specialty Products has been recognized by CSU's Health & Safety Consultation Services as one of the safest companies in Colorado by Achieving and maintaining SHARP certification since 2005.
- SPC also has an Environmental Management System conforming to ISO 14001 as part of our commitment to environmental protection and sustainability.
- With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".
Add to Wishlist
Add to Wishlist
Brand | SPC Performance |
Fit Type | Vehicle Specific |
Auto Part Position | Upper |
Orientation | Drivers Side |
- Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
- We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
- Specialty Products has been recognized by CSU's Health & Safety Consultation Services as one of the safest companies in Colorado by Achieving and maintaining SHARP certification since 2005.
- SPC also has an Environmental Management System conforming to ISO 14001 as part of our commitment to environmental protection and sustainability.
- With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".
Add to Wishlist
Add to Wishlist
Brand | Specialty Products Company |
Item Weight | 4.2 Pounds |
Caster Type | Stem |
Surface Recommendation | Multi-Surface |
Wheel Width | 2 Inches |
- Caster ±2.0°
- 1964.5 – 66 Mustang
- 1964 – 65 Falcon, 1964 – 65 Ranchero
- 1964 – 65 Comet, 1964 – 65 Cyclone
Add to Wishlist
Add to Wishlist
Join our newsletter and get exclusive offers
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we don't spam!
Your one-stop shop for all things automotive! From oil filters to engine parts, we’ve got you covered.
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00