- Free shipping for orders over 250$ in the United States
End of Time:
:::
0
0 items
$0.00
No products in the cart.
- STUD INSTALLER TOOL: Using this stud installer tool prevents damage to your lug nut or new stud by reducing friction during stud installation; Wheel stud installer kit saves you time and money
- WIDELY USEFUL: This stud tool kit comes in handy when working on a variety of vehicles; Wheel stud installer tool works with hubs, rotors, and axles on both front and rear-wheel drive vehicles
- SAFE TO USE: Bearing reduces friction, allowing you to install new studs using a lug nut without worrying about damaging your stud threads; Makes installing studs for cars, truck studs, and trailer lug studs fast and easy
- STURDY AND DURABLE: The wide bearing face on this wheel stud installer tool kit distributes the load to prevent damage and extend the life of the tool; Wheel stud kit is safe for multiple uses with an impact wrench
- FITS MANY VEHICLES: This tire stud installer is designed to fit studs up to 9/16" (14 mm); Has the ability to service a wide range of passenger vehicles up to half-ton and three-quarter ton pickup trucks
Add to Wishlist
Add to Wishlist
- Center Hole Diameter: 74Mm.
- Contents: One Pair Of Wheel Spacers, Set Of Lug Nuts.
- Hub Bolt Circle Dia: 4.75 In.
- Number Of Lugs: 5.
- Overall Diameter: 6-1/2 In.
Add to Wishlist
Add to Wishlist
Brand: REV Wheels
Exterior Finish: Chrome,Stainless Steel
Material: Chrome,Stainless Steel
- Center Cap for REV 107 Series Rally Wheels
- Disc Brake Cap - Stainless Steel with Chrome Finish
- Sold Individually
Add to Wishlist
Add to Wishlist
- Large adjustment range
- Anodized finish
- Street Seal (TM) corrosion protectant technology
Add to Wishlist
Add to Wishlist
- Provides More Seating Surface than Traditional Lug Nuts
- Stamped with Thread Size for Easy Identification and to Prevent Confusion
- Made of High-Strength Steel
Add to Wishlist
Add to Wishlist
Brand | Fuel Off-Road Wheels |
Color | Black |
Installation Type | Snap-On |
- Official Fuel Off-Road Wheels brand Center Cap
- Includes one (1) single Center Cap
- Cap height is 3-1/4" from very top to bottom
- Matte Black Center Cap
Add to Wishlist
Add to Wishlist
Exterior Finish | Chrome |
Material | Chrome |
Installation Type | Bolt-On |
Add to Wishlist
Add to Wishlist
Brand | VISION |
Exterior Finish | Chrome |
Material | Chrome |
Add to Wishlist
Add to Wishlist
- VooDoo Offroad’s Starter Pack Recovery Kit is a necessary addition to every truck, SUV, side by side, or rock crawler! The Starter Pack Recovery Kit builds a foundation for all your off-road and 4x4 recovery needs
- This kit includes (2) 42” Traction Boards, a D-Handle Pack Shovel, 67-Piece Tire Repair Kit, and a Fire Starter with Paracord
- Whether you’re stuck in the sand, have a flat tire, or need to start a fire, this kit has you covered!
- Universal Application
Add to Wishlist
Add to Wishlist
Size | 18x8 |
Exterior Finish | Aluminum |
Brand | US Mags |
Wheel Size | 18 Inches |
Material | Aluminum |
Pitch Circle Diameter | 127 Millimeters |
Wheel Backspacing | 4.54 Inches |
Rim Size | 18 Inches |
Item Weight | 30 Pounds |
Item Diameter | 18 Inches |
- 18X8, 1 Offset
- Chrome Plated Finish
- Enhance the appearance and value of your vintage ridewith the original wheel brand and styles that were introduced when your car was new
Add to Wishlist
Add to Wishlist
Color | Black Denim |
Material | Fabric |
Brand | Smittybilt |
- Designed with tight fit to reduce wind flapping
- Made from weather resistant outdoor grade fabric
- Highly durable
- Requires no tools
- Ensures easy installation
Add to Wishlist
Add to Wishlist
- Spidertrax 1.25" thick, 6 on 5.5" bolt-on design for front and rear axles.
- The WHS007 Wheel Spacer Kit is designed specifically to be compatible with the following models: 2007-2014 FJ Cruiser, 2001-Present Tacoma 4WD & PreRunner, 2001-2007 Sequoia, 2000-2006 Tundra, 1996-Present 4Runner
- Factory machined pre-installed 4140 wheel studs.
- Anodized 6061T6 domestic grade aluminum alloy.
- Precision wheel and hub centric fit.
Add to Wishlist
Add to Wishlist
- Spidertrax 1.25" thick, 6 on 5.5" bolt-on design for front and rear axles.
- The WHS007 Wheel Spacer Kit is designed specifically to be compatible with the following models: 2007-2014 FJ Cruiser, 2001-Present Tacoma 4WD & PreRunner, 2001-2007 Sequoia, 2000-2006 Tundra, 1996-Present 4Runner
- Factory machined pre-installed 4140 wheel studs.
- Anodized 6061T6 domestic grade aluminum alloy.
- Precision wheel and hub centric fit.
Add to Wishlist
Add to Wishlist
- Scott Drake Magnum 500 Wheels - D1ZZ-1007-CR
Add to Wishlist
Add to Wishlist
- Manufactured In The United States
- Sophisticated Tooling
Add to Wishlist
Add to Wishlist
- Manufactured In The United States
- Sophisticated Tooling
Add to Wishlist
Add to Wishlist
Find the Right Parts Faster
Having the right automotive parts and car accessories will help you to boost your travel comfort and go on the long-distance journey comfortably that you have been planning.
Filter by price
Join our newsletter and get exclusive offers
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we don't spam!
Your one-stop shop for all things automotive! From oil filters to engine parts, we’ve got you covered.
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00