- Free shipping for orders over 250$ in the United States
End of Time:
:::
Brand: Moroso
Fit Type: Universal Fit
Material: Stainless Steel, Aluminum
Specification Met: OE
Auto Part Position: Rear
- Includes 1/8" N.P.T. Fitting and -12AN Fitting Allows the vacuum pump and vacuum gauge to be connected Can also be used as a drain back location Black Anodized Includes gaskets and Stainless Steel Socket Head Screws*Note: Installation of this product requires pulling vacuum from a valve cover as well
Add to Wishlist
Add to Wishlist
- automotive-carburetor-linkages
Add to Wishlist
Add to Wishlist
Your recently viewed items and featured recommendations › View or edit your browsing history After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.
Add to cart Add to Wishlist
Add to Wishlist
| Brand | Pacific Performance Engineering |
| Item Dimensions LxWxH | 10 x 11 x 4 inches |
| Maximum Pressure | 70 Pound per Square Inch |
| Nominal Wall Thickness | 6 mm |
- Strenthened with 5 plies of Nomex reinforced fibers
- Withstands temperatures from -76 to 437 degrees Fahrenheit
- Working pressure: 70 psi - BAR 4.20
- Burst pressure: 207 psi - BAR 14.15
- Higher flow and better lubricity than rubber
Add to Wishlist
Add to Wishlist
| Brand | Pacific Performance Engineering |
| Item Dimensions LxWxH | 6 x 8 x 6 inches |
| Maximum Pressure | 70 Pound per Square Inch |
| Nominal Wall Thickness | 6 month |
- Strenthened with 5 plies of Nomex reinforced fibers
- Withstands temperatures from -76 to 437 degrees Fahrenheit
- Working pressure: 70 psi - BAR 4.51
- Burst pressure: 207 psi - BAR 14.46
- Higher flow and better lubricity than rubber
Add to Wishlist
Add to Wishlist
- 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
- CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
- BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged ball joints - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
- WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
Add to Wishlist
Add to Wishlist
- 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
- CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
- BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged ball joints - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
- WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
Add to Wishlist
Add to Wishlist
- 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
- CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
- BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged ball joints - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
- WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
Add to Wishlist
Add to Wishlist
- Genuine Ford Racing
- OEM quality
- Built for performance
Add to Wishlist
Add to Wishlist
- Product Type: Auto Part
- Package Quantity: 1
- Package Dimensions: 4.25" (L) x 3.0" (W) x 1.25" (H)
- Country Of Origin: United States
Add to Wishlist
Add to Wishlist
- This boost control solenoid can be controlled from a MegaSquirt EMS with the appropriate mods, or with other electronic boost controllers
- The MS3X, eMS-Pro, MSPNP, and DIYPNP have the circuits needed to drive this directly
- It operates on a frequency of 19.5-40 Hz and is practically a wire-in replacement for the now-discontinued GM EBC Solenoid
- It usually needs a slightly lower duty cycle than the GM valve; if you're replacing a GM valve, we recommend cutting back your duty cycles by 30% and then carefully testing and adjusting as needed
- Note this valve is a perfect match for use with our MegaSquirtPNP and DIYPNP line of PNP EMS systems
Add to Wishlist
Add to Wishlist
| Brand | Flowtech |
| Item Dimensions LxWxH | 9.5 x 6 x 3.5 inches |
| Connector Type | Reducer |
| Item Weight | 1.5 Pounds |
- Flowtech 10110FLT Reducer with O2 Sensor Fitting
Add to Wishlist
Add to Wishlist
Join our newsletter and get exclusive offers
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we don't spam!
Your one-stop shop for all things automotive! From oil filters to engine parts, we’ve got you covered.
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Store Information
Copyright 2023 © VINYASA Automotive.
