- Free shipping for orders over 250$ in the United States
End of Time:
:::
Brand: Moroso
Fit Type: Universal Fit
Material: Stainless Steel, Aluminum
Specification Met: OE
Auto Part Position: Rear
- Includes 1/8" N.P.T. Fitting and -12AN Fitting Allows the vacuum pump and vacuum gauge to be connected Can also be used as a drain back location Black Anodized Includes gaskets and Stainless Steel Socket Head Screws*Note: Installation of this product requires pulling vacuum from a valve cover as well
Add to Wishlist
Add to Wishlist
- Guaranteed fitment
- Precision-molded to OE dimensions to ensure compatibility with original sensors and connections
- Quality materials resist engine heat and harsh cooling system environment
- Factory pressure-tested
- 24-Month / Unlimited Mileage Warranty
- Fit type: Vehicle Specific
Add to Wishlist
Add to Wishlist
| Brand | PCE |
| Material | Aluminum |
| Fit Type | Universal |
| Item Dimensions LxWxH | 6 x 8 x 3 inches |
| Product Grade | Performance Part |
- Designed to deliver trouble-free, consistent performance
- Right for your vehicle and lifestyle
- Made from high-quality materials for ultimate durability
- Manufactured to meet or exceed strict quality requirements
- If you have any questions or need fitment information for your vehicle, please contact with us
Add to Wishlist
Add to Wishlist
| Brand | Pacific Performance Engineering |
| Item Dimensions LxWxH | 10 x 11 x 4 inches |
| Maximum Pressure | 70 Pound per Square Inch |
| Nominal Wall Thickness | 6 mm |
- Strenthened with 5 plies of Nomex reinforced fibers
- Withstands temperatures from -76 to 437 degrees Fahrenheit
- Working pressure: 70 psi - BAR 4.20
- Burst pressure: 207 psi - BAR 14.15
- Higher flow and better lubricity than rubber
Add to Wishlist
Add to Wishlist
| Brand | Pacific Performance Engineering |
| Item Dimensions LxWxH | 6 x 8 x 6 inches |
| Maximum Pressure | 70 Pound per Square Inch |
| Nominal Wall Thickness | 6 month |
- Strenthened with 5 plies of Nomex reinforced fibers
- Withstands temperatures from -76 to 437 degrees Fahrenheit
- Working pressure: 70 psi - BAR 4.51
- Burst pressure: 207 psi - BAR 14.46
- Higher flow and better lubricity than rubber
Add to Wishlist
Add to Wishlist
- Electric Float Switch allows single point detection of coolant high/low levels through a side wall of a tank using normally open or normally closed contacts 30 Watt rated switch can be wired into a OEM Low Coolant Level circuit or used as a switch for an aftermarket coolant level light Includes a 1/2" NPT aluminum bung so that the level sensor option can be added by drilling and welding the bung to a customer's aluminum coolant tank
Add to Wishlist
Add to Wishlist
| Brand | Moroso |
| Material | Aluminum |
| Fit Type | Vehicle Specific |
| Product Grade | Replacement Part |
- Moroso 63767 Expansion Tank for Mustang
Add to Wishlist
Add to Wishlist
- Product Type: Auto Part
- Package Quantity: 1
- Package Dimensions: 4.25" (L) x 3.0" (W) x 1.25" (H)
- Country Of Origin: United States
Add to Wishlist
Add to Wishlist
- This boost control solenoid can be controlled from a MegaSquirt EMS with the appropriate mods, or with other electronic boost controllers
- The MS3X, eMS-Pro, MSPNP, and DIYPNP have the circuits needed to drive this directly
- It operates on a frequency of 19.5-40 Hz and is practically a wire-in replacement for the now-discontinued GM EBC Solenoid
- It usually needs a slightly lower duty cycle than the GM valve; if you're replacing a GM valve, we recommend cutting back your duty cycles by 30% and then carefully testing and adjusting as needed
- Note this valve is a perfect match for use with our MegaSquirtPNP and DIYPNP line of PNP EMS systems
Add to Wishlist
Add to Wishlist
- 8" x 5" x 4"
- Side Port: 1/4" NPT
- Bottom Port: 1/4" NPT
- 2 quart Size: 8" Tall, 5" Wide, 4" Deep. Tank: 2 qt. tank. Side Port: 1/4" N.P.T. Bottom Port: 1/4" N.P.T. Comes with clear tube sight gauge, integrated mounting flanges, and in addition to the petcock & vented cap, two 5/16" barbed fittings 1X 90 deg. & 1X straight.
Add to Wishlist
Add to Wishlist
| Brand | Flowtech |
| Item Dimensions LxWxH | 9.5 x 6 x 3.5 inches |
| Connector Type | Reducer |
| Item Weight | 1.5 Pounds |
- Flowtech 10110FLT Reducer with O2 Sensor Fitting
Add to Wishlist
Add to Wishlist
Join our newsletter and get exclusive offers
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we don't spam!
Your one-stop shop for all things automotive! From oil filters to engine parts, we’ve got you covered.
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Store Information
Copyright 2023 © VINYASA Automotive.
