- Free shipping for orders over 250$ in the United States
End of Time:
:::
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life
- On-car vehicle validation is done to test durability and performance
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Complete sensor replacement with a brand-new component ensures the unit will perform like new
- Full computer testing of every unit for linearity and correlation validates that units are fully restored to O.E. function
- Sensor is offered separately where possible to save the cost of replacing the entire assembly; Installation hardware is included for smooth installation
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent
Add to Wishlist
Add to Wishlist
- Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function
- Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
- An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
- CV Drive Axle measurements are validated after assembly to ensure a proper fit; Threads are precision rolled to ensure proper fit when axle nut is installed
- Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- All NEW universal joints are installed to ensure proper fit and optimal performance
- All slip yokes are lubricated to prevent premature wear
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Unit face is restored to O.E. appearance and functionality; Electronic repair components are upgraded to meet or exceed the O.E. design.
- 100% of the backlight bulbs are replaced; 100% functional testing delivers guaranteed performance and reliability.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Every motor has its internal components inspected and gauged; Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation
- Internal gears are gauged, inspected and renewed for reuse or replaced if out of spec; Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
- Motor magnets are 100% recharged, guaranteeing efficiency and reliability; For motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the ‘full up position’
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation
- Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment; Each unit comes with a pre-lube syringe to ensure product protection during installation
- All rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability; Units are supplied with 100% tested and calibrated pressure relief valves
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks; HNBR does not break down at high temperatures like conventional seal material
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life; Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Pistons are durable, resistant to cracking or pitting and handle great loads; calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish
- Rubber seals are replaced with high temperature EPDM rubber for extended life and optimum performance
- New bleeder screws provide trouble-free bleeding and a positive seal and new washers are included where applicable
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Pistons are durable, resistant to cracking or pitting and handle great loads; calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish
- Rubber seals are replaced with high temperature EPDM rubber for extended life and optimum performance
- New bleeder screws provide trouble-free bleeding and a positive seal and new washers are included where applicable
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%
Add to Wishlist
Add to Wishlist
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit
- Pistons are durable, resistant to cracking or pitting and handle great loads; calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish
- Rubber seals are replaced with high temperature EPDM rubber for extended life and optimum performance
- New bleeder screws provide trouble-free bleeding and a positive seal and new washers are included where applicable
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%
Add to Wishlist
Add to Wishlist
- Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
- Castings feature a premium protective coating to minimize corrosion and extend unit life
- Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute and plastic reservoirs are vacuum-tested to ensure they are leak free
- Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
Add to Wishlist
Add to Wishlist
- Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
- Castings feature a premium protective coating to minimize corrosion and extend unit life
- Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute and plastic reservoirs are vacuum-tested to ensure they are leak free
- Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
Add to Wishlist
Add to Wishlist
| Brand | Aldan American Shocks |
| Style | Adjustable |
| Exterior Finish | Machined |
- Phantom
- Single Adj.17.00 in. Extended
- 12.00 in. Compressed
- Each. Bearing. Rebound Adjustable. Made in USA
Add to Wishlist
Add to Wishlist
- Single Adj. 14.00 in. Extended
- 11.20 in. Compressed
- Each. Stud/Bearing. Mustang II Replacement. Made in USA
Add to Wishlist
Add to Wishlist
| Brand | Aldan American Shocks |
| Auto Part Position | Rear |
| Material | Men s mesh |
| Included Components | Aldan G3SBR2 Coil-Over Kit, Dodge |
- Dodge Viper. Rear
- Pair
- Fits 2003-2010 Stock Ride Height
- Includes one Pair of Single Adj
- Rear Coil-Over Shocks & Black Coil Springs
Add to Wishlist
Add to Wishlist
Find the Right Parts Faster
Having the right automotive parts and car accessories will help you to boost your travel comfort and go on the long-distance journey comfortably that you have been planning.
Filter by price
Filter by Color
- Aqua (1)
- Armor Gray (1)
- Billet Aluminum (1)
- Black (82)
- Black CF (1)
- Black PTM (1)
- Black, White (1)
- Brown (1)
- Camouflage,Brown (1)
- Chrome (16)
- Clear (1)
- Dark Grey/Black (2)
- Default Title (1)
- Factory (8)
- Fluorescent Orange (1)
- Ford Blue (1)
- Ford Corporate Blue (1)
- Gloss Black (1)
- Gojak Purple (3)
- Gold (1)
- Graphite (1)
- Gray (2)
- Green (7)
- Grey (3)
- KARBN Pattern (1)
- Maroon (1)
- Matte Black (2)
- Matte Clear (3)
- Multi (34)
- Multi color (1)
- Multi-colour (1)
- Multicolor (3)
- Multicolored (1)
- Multicoloured (1)
- Natural (2)
- Old version (1)
- Orange (1)
- Original Version (1)
- Other (1)
- Pearl Black (1)
- Polished-Clear Anodized (1)
- Red (16)
- Red, Blue, Black (1)
- Red,black (1)
- Saddle (1)
- Safety Yellow (1)
- Semi-Gloss Gray (1)
- Silver (9)
- Silver, Black (1)
- Smoke (3)
- Smoky Blue (1)
- Stainless Steel (3)
- Standard (1)
- White (12)
- White Color,White,Red (1)
- Wicked Fluorescent Aqua (1)
- Wicked Fluorescent Pink (1)
- Wicked Fluorescent Sunburst (1)
- Wood,Gray (1)
- Yellow (6)
- Yellow/Black (1)
- Zinc (1)
- Blue (8)
- Bronze (1)
Brands
- Action Can (1)
- Barzetta (1)
- Big Wipes (1)
- Everbuild (1)
- Goodride (1)
- Holts (1)
- Kluhsman Racing Components (1)
- LIQUI MOLY (1)
- Malco (1)
- Milwaukee (5)
- Ronseal (1)
- Summit Racing (2)
- TEC TANE (1)
- WD-40 (2)
- Wera (5)
Join our newsletter and get exclusive offers
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we don't spam!
Your one-stop shop for all things automotive! From oil filters to engine parts, we’ve got you covered.
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Store Information
Copyright 2023 © VINYASA Automotive.
